// Showcases
Technology in practice.
Not a glossy reference list, but real projects: what the problem was, how we went at it, what came out. This is where we sell competence instead of advertising promises.
-
Custom machines Large-area microstructure replication with micrometre precision A machine that replicates a 200 × 250 mm² unit cell across areas up to 1740 × 1300 mm², measuring every process parameter instead of guessing at it. Capabilities: Precision mechanics, Axes and positioning, Machine vision, Metrology, Controls and software, Data and traceability, Cleanroom and vacuum
-
Custom machines DUV optics alignment and metrology on an enclosed beam path Four test benches that align optical lithography modules themselves, measure against that alignment, and log every value they used to do it. Capabilities: Optics and photonics, Metrology, Precision mechanics, Axes and positioning, Controls and software, Data and traceability
-
Custom machines Tooth flank measurement accurate to one micrometre A measuring machine for tooth flank geometry where an operator swaps the sensor in under five minutes without tools, and it never comes off by more than a micrometre afterwards. Capabilities: Precision mechanics, Axes and positioning, Metrology, Simulation and analysis, Concept and feasibility
-
Custom machines Membrane thickness measurement for ceramic pressure sensors Every part measured and classified without contact, at ±1.5 µm at 3σ, in under three seconds. Capabilities: Metrology, Precision mechanics, Controls and software, Data and traceability, Concept and feasibility
-
Custom machines Force-controlled winding of polarisation-sensitive fibres How precise force control during winding turns a glass fibre into a highly sensitive measurement system, for winding lengths of up to 3000 m. Capabilities: Optics and photonics, Precision mechanics, Axes and positioning, Controls and software
-
Vision systems Fiducial detection on mirror, glass and hologram Detecting features from 5 µm to within ±1 µm, on polished nickel, clear film, polycarbonate and a hologram that throws back a different colour for every angle. Capabilities: Machine vision, Optics and photonics, Metrology, Controls and software
-
Vision systems Sub-micron wafer alignment: why two marks are not enough Six wafers, two mark types, one machine. In one configuration placement was under 1 µm, in the other 5 to 6 µm. The difference was not in the mechanics, but in the number of measurement points. Capabilities: Machine vision, Metrology, Concept and feasibility
-
Production lines Five tonnes of precision into the cleanroom A granite gantry, signed off to ±5 µm, disassembled, lifted by crane over a building, lowered into a basement, carried through a standard door, reassembled in the finished cleanroom and measured again on site. Capabilities: Assembly and installation, Cleanroom and vacuum, Precision mechanics, Metrology
-
Production lines Three measuring machines, one technology transfer Three identical measuring machines for one production line. We built the first, the customer built the second and third from documentation written for exactly that. Capabilities: Assembly and installation, Precision mechanics, Metrology, Concept and feasibility
-
Process development Flux-free laser soldering in high vacuum The laser is the easy part. The real work is in the surface and the temperature profile before and after. Capabilities: Laser processes, Simulation and analysis, Cleanroom and vacuum, Metrology
-
Process development The tilt stage that was too expensive and won anyway Six concepts for one tilt stage, assessed in three parallel evaluations. The winner had three documented arguments against it, and all three were answered afterwards, one at a time. Capabilities: Concept and feasibility, Axes and positioning, Precision mechanics, Metrology
-
Process development Homogenising multi-colour laser light sources How three individual laser diodes become a single, homogeneous and colour-accurate light field, without complex additional optics. Capabilities: Optics and photonics, Laser processes, Metrology
No showcase matches this combination. Drop one filter or clear the selection.
Get in touch
We are ready for new challenges
You bring the challenge. We develop the solution. From the first idea through concept and development to the validated machine, we guide your project.

